en - Original instructions
e-SV series - Installation, Operation and Maintenance Manual 5
1 Introduction and Safety
1.1 Introduction
Purpose of this manual
This manual provides information on how to do the following in the correct manner:
Installation
Operation
Maintenance.
CAUTION:
This manual is an integral part of the unit. Make sure to have read and understood the manual
before installing the unit and putting it to use. The manual must always be made available to
the user, stored in the proximity of the unit, and well kept.
Supplementary instructions
The instructions and warnings of this manual apply to the standard unit as described in the sale
documentation. Special version pumps may be supplied with supplementary instruction
manuals. For situations not considered in the manual or in the sales document, contact Xylem
or the Authorised Distributor.
1.2 Safety
1.2.1 Danger levels and safety symbols
Before using the unit, the user must read, understand and comply with the indications of the
danger warnings in order to avoid the following risks:
Injuries and health hazards
Damage to the product
Unit malfunction.
Danger levels
It identifies a dangerous situation which, if not
avoided, causes serious injury, or even death.
It identifies a dangerous situation which, if not
avoided, may cause serious injury, or even
death.
It identifies a dangerous situation which, if not
avoided, may cause small or medium level
injuries.
It identifies a situation which, if not avoided,
may cause damage to property but not to
people.