DTC 30035 (Cont)
Brake
CAUSE B - BRAKE COIL FAULT
PROCEDURE OR ACTION:
1. Measure resistance between CPS01, socket 5 and CRP04-A, socket 1.
Is resistance 23 ± 2.3 ohms?
YES: Proceed to Cause C.
NO: Replace faulty brake coil.
CAUSE C - FAULTY TRACTION CONTROLLER
PROCEDURE OR ACTION:
1. If no faults are found, replace controller. Make sure to indicate the DTC code(s) on the warranty claim to in-
clude an accurate problem description leading to controller replacement.
END POSSIBLE CAUSES
Diagnostic Trouble Codes ELECTRICAL SYSTEM
Check the Service Manual section in Yale Axcess Online for possible updates and check pertinent Bulletins
9030-20-12
To Next Page
Loading...