DTC 30037 (Cont)
AlrmCoil
CAUSE B - ALARM FAULT
PROCEDURE OR ACTION:
NOTE: Key in ON position.
NOTE: Operate alarm.
1. Measure continuity between the alarm connector TS09 and B(-).
Is continuity present?
YES: Replace faulty alarm.
NO: Proceed to Cause C.
CAUSE C - FAULTY TRACTION CONTROLLER
PROCEDURE OR ACTION:
1. If no faults are found, replace controller. Make sure to indicate the DTC code(s) on the warranty claim to in-
clude an accurate problem description leading to controller replacement.
END POSSIBLE CAUSES
Diagnostic Trouble Codes ELECTRICAL SYSTEM
Check the Service Manual section in Yale Axcess Online for possible updates and check pertinent Bulletins
9030-20-16
To Next Page
Loading...