Yale SHAW-BOX

4 Installation
03.2018 33
ba-o.2.6.0-us-1.1-y | A11867501 Rev AA
Drive shaft for travel drive (DKE-S4 / DKE-S6)
Trolleys with one travel drive
Fig. 21
Drive shaft D
Ø D
B
L
L4 ±0.079
[in]
[in]
[in]
[in]
3.9
3.5 - 5
15.4
1.83
5.1 - 8.7
19.5
5.5
4.7 - 11
19.5
11.1 - 11.8
28
Tab. 14
The drive shaft “D” is suitable for beam widths “B” from 3.5 in. to 11.8 in.
1. Fit lock washers “S” acc. to dimension “L4”.
The mounting position of the drive shaft does not change over the corresponding
beam range “B”.
Trolleys with two travel drives
Ø D 3.9 in
Ø D 5.5 in
Fig. 22
The drive shaft is completely independent of the beam width.
1. Mount lock washers “S” acc. To Fig.21 and Fig. 22. Drawings above