4 Installation
03.2018 37
ba-o.2.6.0-us-1.1-y | A11867501 Rev AA
4.7 Anti-jump catch
4.7.1 Description of system
The anti-jump catch acts as an anti-derail device, preventing the trolley jumping off the rail
and falling.
Trolley types OE-S04, OE-S05
Trolley types OE-S06, OE-S07
Falling parts hazard.
➢ Cordon off and secure danger area during installation and dismantling work.
The anti-jump catch is supplied pre-mounted on the trolley and must be adapted to the
actual runway situation.
Fig. 30
1. Unscrew fixing screws (1) of anti-jump catch.
2. Swivel the whole unit by 90° and re-screw.
Tightening torque M8 = 8.4 lb
f
ft, M10 = 37.6 lb
f
ft.
Trolley type OE-S07 4PD
Fig. 31
There are two retaining plates “A” welded in place.
1. Swivel two units of the anti-jump catch by 90°.
To Next Page
Loading...
