VARIOU
CDC-G8S only
CDC-G8S
only
!!!!!!!!!!!!!!!!!ll!
For optimum sound quality
* When the DIGITAL AUDIO
OUT
(OPTICAL) terminal
is
used for the connection, set the level
of
output signals
to max.
* The level
of
output signals can be checked in the display.
II
Adjusting the level of signals output
into an amplifier, etc.
You
can adjust the level
of
sound signals output from the
LINE OUT terminals on the rear panel into an amplifier,
etc.
as
you prefer by using the OUTPUT LEVEL
-/+
buttons.
You
can start play at any specified time by connecting a
timer (sold separately). Refer also to the instructions for the
timer.
CD
Select the desired play mode
(1
DISC or 5DISCS).
WPress the POWER switch to tum the unit off.
® Press the POWER switch while pressing the
C>/DD
button
on the front panel.
Shortly thereafter, "TIMER
P.
ON" appears in the
display and the timer play function
is
on.
(When the timer play function
is
already on, in which
case, "TIMER
P.
OFF" appears in the display and timer
play function
is
off. In this case, repeat the procedure in
steps
2 and 3 to set the timer play function to on.)
® Set the timer to the desired time.
When the set time comes, the unit turns on and starts
play.
OUTA..JTLEVEL
- +
Q.-~
:';./
V
On the front panel
or
-
OUTPUT
LEVEL
+
~
.:
...
~
..
L~'
CDC-G8S only
II
When you listen with headphones
Connect the headphones to the PHONES jack and adjust
the volume by using the
OUTPUT LEVEL
-/+
buttons.
* Note that the use
of
the OUTPUT LEVEL
-/+
buttons
will also vary the level
of
the signal output to an
amplifier, etc.
PHONES
E-15
VARIOU
CDC-G8S only
CDC-G8S
only
!!!!!!!!!!!!!!!!!ll!
For optimum sound quality
* When the DIGITAL AUDIO
OUT
(OPTICAL) terminal
is
used for the connection, set the level
of
output signals
to max.
* The level
of
output signals can be checked in the display.
II
Adjusting the level of signals output
into an amplifier, etc.
You
can adjust the level
of
sound signals output from the
LINE OUT terminals on the rear panel into an amplifier,
etc.
as
you prefer by using the OUTPUT LEVEL
-/+
buttons.
You
can start play at any specified time by connecting a
timer (sold separately). Refer also to the instructions for the
timer.
CD
Select the desired play mode
(1
DISC or 5DISCS).
WPress the POWER switch to tum the unit off.
® Press the POWER switch while pressing the
C>/DD
button
on the front panel.
Shortly thereafter, "TIMER
P.
ON" appears in the
display and the timer play function
is
on.
(When the timer play function
is
already on, in which
case, "TIMER
P.
OFF" appears in the display and timer
play function
is
off. In this case, repeat the procedure in
steps
2 and 3 to set the timer play function to on.)
® Set the timer to the desired time.
When the set time comes, the unit turns on and starts
play.
OUTA..JTLEVEL
- +
Q.-~
:';./
V
On the front panel
or
-
OUTPUT
LEVEL
+
~
.:
...
~
..
L~'
CDC-G8S only
II
When you listen with headphones
Connect the headphones to the PHONES jack and adjust
the volume by using the
OUTPUT LEVEL
-/+
buttons.
* Note that the use
of
the OUTPUT LEVEL
-/+
buttons
will also vary the level
of
the signal output to an
amplifier, etc.
PHONES
E-15
To Next Page
Loading...
