Yamaha CL1 - Page 5

CL Editor Owner’s Manual
5
8 CH OPERATION
INPUT, ST IN, MIX, MATRIX, ST/MONO, DCA: Select the channels whose parameters will be operable.
HA: Change the operating privileges for the head amp gain (analog gain) and phantom power of the selected chan-
nels.
PROCESSING: Change the operating privileges for overall signal processing parameters (except for fader and
[ON] button) of the selected channel. For the specific parameters included in PROCESSING, refer to the CL’s man-
ual.
FADER/ON: Change the operating privileges for the pan/balance, fader, channel on, send on/off, and send level of
the selected channels.
Set All: Turn on HA, PROCESSING, and FADER/ON for all channels.
Clear All: Turn off HA, PROCESSING, and FADER/ON for all channels.
Set by One Click: If this button is on, pressing the channel select button repeatedly will set HA, PROCESSING,
and FADER/ON to On or Off simultaneously.
9 SCENE LIST
STORE/SORT: Change the operating privileges for scene store and sort operations.
RECALL: Change the operating privileges for scene recall operations.
0 LIBRARY LIST
STORE/CLEAR: Change the operating privileges for library store and clear operations.
RECALL: Change the operating privileges for library recall operations.
A FILE LOAD
USER SETUP: Change the operating privileges for loading user-defined keys and preferences when loading a file.
SYSTEM SETUP MONITOR SETUP: Change the operating privileges for loading system setup and monitor
setup settings when loading a file.
CURRENT SCENE: Change the operating privileges for loading the current scene when loading a file.
SCENE LIST: Change the operating privileges for loading the scene list when loading a file.
LIBRARY LIST: Change the operating privileges for loading the library list when loading a file.
B CURRENT SCENE
INPUT PATCH: Change the operating privileges for input patch operations.
INPUT NAME: Change the privileges for editing the input names.
OUTPUT PATCH: Change the operating privileges for output patching.
OUTPUT NAME: Change the privileges for editing the output names.
BUS SETUP: Change the operating privileges for buses.
GEQ 1-16: Change the operating privileges for GEQ (Graphic Equalizer) rack operations.
EFFECT: Change the operating privileges for EFFECT rack operations.
PREMIUM RACK: Change the operating privileges for PREMIUM rack operations.
MUTE GROUP ASSIGN: Change the privileges for assigning mute groups.
MUTE GROUP MASTER: Change the operating privileges for enabling/disabling mute groups.
C MONITOR SETUP
OSCILLATOR: Change the operating privileges for oscillator settings.
TALKBACK: Change the operating privileges for talkback settings.
D SYSTEM SETUP
MIXER SETUP: Change the privileges for making mixer setup settings.
OUTPORT SETUP: Change the privileges for making outport setup settings.
MIDI: Change the privileges for making MIDI settings.
E Create
Creates the user key.
F Cancel
Closes the dialogbox.