What does E0 error mean on Yamaha Disklavier E3 Musical Instrument and how to fix it?
If your Yamaha Musical Instrument displays 'E0', check the key adjustment, paying particular attention to uneven keys in the balance section. Also, verify the key rail adjustment, key sensor’s height adjustment, sensor head position, and key shutter. Finally, carry out the measurement again.
How to fix Key Drive thermo error on Yamaha Musical Instrument?
To fix a 'Key Drive thermo error' on your Yamaha Musical Instrument, switch the power OFF and wait for the unit to cool down. Then, switch the power ON again. Also, inspect and adjust the keyboard action and check the key solenoid operation.
What does E1:KS REST AD is too low mean on Yamaha Disklavier E3 and how can I fix it?
If your Yamaha Musical Instrument displays 'E1:KS REST AD is too low', check the key sensor’s height adjustment, sensor head position, and key shutter. Carry out the measurement again.
How to troubleshoot E1:KS END AD is too high error on Yamaha Disklavier E3?
If you encounter 'E1:KS END AD is too high' on your Yamaha Musical Instrument, check the key adjustment, paying attention to uneven keys in the balance section. Also, verify the key rail adjustment, key sensor’s height adjustment, sensor head position, and key shutter. Finally, carry out the measurement again.
What causes E1 error on Yamaha Musical Instrument and how to resolve it?
If your Yamaha Musical Instrument displays 'E1', and you cannot obtain the sensor event, check the key sensor’s height adjustment, sensor head position, and key shutter. Carry out the measurement again. If the problem persists with all keys, inspect the connection between the key sensor unit and the CSP unit.
How to fix Key drive table error on Yamaha Musical Instrument?
If your Yamaha Musical Instrument displays 'Key drive table error', carry out the measurement and check the CSP Unit. This error indicates that the table for keyboard measurement is damaged.
What to do if the Yamaha Disklavier E3 Musical Instrument power does not switch on?
If your Yamaha Musical Instrument is not switching ON, check the AC outlet voltage, the power cord connections, and the main power on the PS unit.
How to resolve Loud PD thermo error on Yamaha Musical Instrument?
If your Yamaha Musical Instrument displays 'Loud PD thermo error', switch the power OFF and allow the solenoid to cool down. Once cooled, switch the power ON again.
What does KD ASIC error mean on Yamaha Disklavier E3 Musical Instrument and how to fix it?
If you are getting a 'KD ASIC error' on your Yamaha Musical Instrument, it indicates a communication problem between the key drive unit and the CSP unit. Check the cable that connects these two units.
How to troubleshoot KS line disconnected error on Yamaha Disklavier E3?
If you see 'KS line disconnected' on your Yamaha Musical Instrument, it means communication is lost between the key sensor unit and the CSP unit. You should check the cable connecting these units.
General| Brand | Yamaha |
|---|---|
| Model | Disklavier E3 Series |
| Category | Musical Instrument |
| Language | English |
Important cautions for adjusting piano components.
Steps for adjusting loud pedal gap and damper felt lift.
Steps for adjusting soft pedal cylinder and striking distance.
Steps for pedal calibration via service center mode.
Details factory settings and clearance adjustment for key sensors.
Procedure for testing and adjusting hammer sensors.
Explains clearance adjustments for the key drive unit.
Notes that pedal drive position requires prior calibration.
Details adjustments for shank stopper height and lateral position.
Steps to check shank stopper movement in quiet mode.
Details how to adjust the hammer sensor height.
Explains clearance adjustments for the key sensor unit.
Details clearance adjustment for the key drive unit.
Procedure to access the service center mode.
Accesses system, version, and unit information.
Lists various test play scenarios for scales and pedals.
Accesses standard, pedal, and full calibration routines.
Covers series calibration for sensors, pedals, and key drive.
Adjusts the half point timing for pedal operation.
Executes comprehensive calibration for series, sensors, pedals, and key drive.
Lists errors related to recording, albums, and playlists.
Prompts for connecting USB HDD for backup.
Errors from excessive key drive or pedal solenoid temperature.
Errors due to lost communication or faulty cables.
Error related to damaged measurement table or CSP sheet.
Errors in key sensor rest/end values and pedal stroke.
Errors from incompatible sensor values or inability to obtain events.
Troubleshooting steps for power-related issues.
Troubleshooting steps for lack of playback.
Addresses issues like no recording, missing notes, and volume differences.
To Next Page