31
RX-V1800/HTR-6190/DSP-AX1800
RX-V1800/HTR-6190/
DSP-AX1800
Fig. 15
Check that the checksum is the same
チェックサムが同じであることを確認します
Execute exit after confirmation.
確認後、終了します
ファームウェアのバージョンおよびチェックサム
の確認後、[EXIT]ボタンを押し、
DSPFLASHERVx800v1.0.exeを終了しま
す。(Fig.15)
After confirming the firmware version and
checksum, press the [EXIT] button and end
“DSP_FLASHER_Vx800_v1.0.exe”. (Fig. 15)
29.ROM VER/SUM
TI-VER.05.09r4
29-6. DSP VERSION
29.ROM VER/SUM
TiSUM:C0117A0C
29-7. DSP SUM