8-31
EBU01066
Spark arrester cleaning
Be sure the exhaust pipe and muffler are cool
before cleaning the spark arrester.
1. Remove the bolts.
2. Remove the tailpipe by pulling it out of
the muffler.
1. Bolt (× 3) 2. Tailpipe
3. Tap the tailpipe lightly, and then use a
wire brush to remove any carbon depos-
its from the spark arrester portion of the
tailpipe.
1. Spark arrester
4. Insert the tailpipe into the muffler and
align the bolt holes.
5. Install and tighten the bolts.
U5VH10.book Page 31 Thursday, May 16, 2002 2:18 PM
To Next Page
Loading...
