Yamaha KODIAK Ultramatic - Rear Shock Absorber Adjustment

4-18
EBU01103
Rear shock absorber adjustment
The spring preload can be adjusted to suit the
rider’s weight and riding conditions.
Adjust the spring preload as follows:
To increase the spring preload, turn the ad-
justing ring in direction
a
.
To decrease the spring preload, turn the ad-
justing ring in direction
b
.
1. Spring preload adjusting ring
2. Position indicator
NOTE:
_
A special wrench can be obtained at a
Yamaha dealer to make this adjustment.
_
1. Special wrench
Standard position: 2
1 - Minimum (soft)
5 - Maximum (hard)
U5VH10.book Page 18 Thursday, May 16, 2002 2:18 PM