10-2
Engine oil:
Type
Recommended engine oil classification: API Service SE, SF, SG type or higher
Quantity:
Periodic oil change 2.3 L (2.0 Imp qt, 2.4 US qt)
With oil filter replacement 2.4 L (2.1 Imp qt, 2.5 US qt)
Total amount 2.6 L (2.3 Imp qt, 2.8 US qt)
Model
YFM400A
0˚
10˚ 30˚
50˚
70˚
90˚
110˚
130˚F
YAMALUBE 4 (10W30) or SAE 10W30
SAE 5W30
-20˚
-10˚ 0˚
10˚
20˚
30˚ 40˚ 50˚C
YAMALUBE 4 (20W40) or SAE 20W40
CAUTION:
In order to prevent clutch slippage (since the en-
gine oil also lubricates the clutch), do not mix any
chemical additives. Do not use oils with a diesel
specification of “CD” or oils of a higher quality
than specified. In addition, do not use oils labeled
“ENERGY CONSERVING II” or higher.
U5VH10.book Page 2 Thursday, May 16, 2002 2:18 PM
To Next Page
Loading...
