Yamaha RX-E600 - Recording and Dubbing Operations

SYSTEM CONTROL
19
English
• Recording automatically starts at the beginning of
the tape. (Pressing DUBBING START
automactially rewinds the tape to the beginning)
• Recording automatically starts at the beginning of
the tape. (Pressing DUBBING START
automactially rewinds the tape to the beginning)
2 Press DUBBING START to start recording.
Note
• The displays 1~4 which include the component you have
not connected to your receiver (RX-E600) will be skipped.
To stop dubbing
Press &.
Note
• If DVD playback stops or completes when you are using the
DVD player as a recording source, the recording component
records 10 additional seconds of silence.
Before recording
Follow the instructions as described in “Connecting the
system” on page 5 before using the MDX-E300 or KX-
E300 to record. For details, refer to the instructions
supplied with the MDX-E300 or KX-E300. Sources
connected to the AUX terminal can be recorded to tape or
MD.
Dubbing setting
There are six combinations of components. When you
select a mode, recording for mode starts and ends
automatically in a manner preset for that mode.
DUBBING
START
DUBBING
MODE
1
2
1 Select a component combination. Each time you
press DUBBING MODE, the mode changes in the
following order:
3
4
Record unitPlay unit
TAPE
DIRECTION
PRESET
TUNER
PRESET
MD
DVD
TAPE
AUX
MD
REC
/ PAUSE
TAP E
REC
/ PAU SE
MODE
SLEEP
DISPLAY
DUBBING
VOLUME
START
Record unitPlay unit