How to fix Yamaha TSX-130 when cannot tune into any DAB stations?
If you cannot tune into any DAB stations on your Yamaha Stereo System, it may be because the initial scan operations were not performed. Perform the initial scan operations. It could also be that there is no DAB coverage in your area. Change the height, direction, or placement of the indoor DAB/FM antenna.
Why won't my Yamaha TSX-130 Stereo System play MP3 files from USB?
If your MP3/WMA file in the USB device does not play on the Yamaha Stereo System, the USB device might not be recognized. Turn the system off and on again. If that doesn't work, disconnect the device while the system is off, then reconnect it and turn the system on. Also, connect an AC adapter if one came with the device. As a last resort, try another USB device.
What to do if Yamaha TSX-130 Stereo System remote control is not working?
If your Yamaha Stereo System's remote control isn't working correctly, there might be several reasons: * You may be operating the remote outside of its intended range. * The remote control sensor on the unit could be exposed to direct sunlight or certain types of lighting. Try adjusting the lighting or the unit's orientation. * The battery might be low. Replace it with a new one. * There might be obstructions between the remote and the unit's sensor. Remove any obstacles.
Why does my Yamaha TSX-130 Stereo System delay playback?
If playback doesn't start immediately after pressing play on your Yamaha Stereo System, the disc may be dirty; try wiping it clean. The disc may also be incompatible. If the unit was moved from a cold to a warm place, condensation may have formed on the disc reading lens; wait an hour or two for the unit to adjust to room temperature and try again.
Why some buttons on my Yamaha TSX-130 Stereo System don't work?
If some button operations on your Yamaha Stereo System aren't working, the disc you've loaded might be incompatible. Remove the disc and check if the unit supports it.
Why isn't my iPod charging on my Yamaha TSX-130 Stereo System?
If your iPod isn't charging when docked in your Yamaha Stereo System, it might not be properly set in the iPod dock. Remove the iPod and then re-dock it.
What does iPod Connect Error mean on my Yamaha TSX-130?
If your Yamaha Stereo System displays “iPod Connect Error”, there may be a communication problem between the unit and your iPod. Turn off the system and then reconnect your iPod to the unit.
Why does the clock setting on my Yamaha TSX-130 Stereo System keep clearing?
If the clock setting on your Yamaha Stereo System has been cleared, it is possible that the unit was left unplugged for more than one week. Plug the power cable into the wall outlet firmly and set the clock again.
How to reset clock on Yamaha TSX-130?
If your Yamaha Stereo System's clock setting has been cleared, it's likely because the unit was left unplugged for more than a week. Plug the power cable firmly back into the wall outlet and set the clock again.
Why does my Yamaha TSX-130 have no sound?
If your Yamaha Stereo System speakers aren't producing any sound, check the following: * Ensure the volume isn't set to the minimum level. * Make sure the mute function is not activated. * Verify that you've selected the correct source. * Confirm that the disc you're using is compatible with the unit.
General| Impedance | 6 Ω |
|---|---|
| RMS rated power | 30 W |
| Supported radio bands | FM |
| Preset stations quantity | 30 |
| Type | Home audio mini system |
| Product color | Black |
| Optical disc player | Yes |
| Number of optical discs | 1 discs |
| Dimensions (WxDxH) | 350 x 120 x 240 mm |
| Media types supported | MP3, WMA |
| Disc types supported | CD, CD-R, CD-RW |
| USB 2.0 ports quantity | 1 |
Weight and Dimensions| Weight | 4000 g |
|---|
To Next Page
