26
TSX-130/TSX-120
TSX-130/TSX-120
NoProtection 1-1VER:D042
D-AMPError
PS1(AD:xxxH)
PS2(AD:xxxL)
When there is a history of protection function:
When there is a history of protection function due to
abnormal amplifier section
For details of protection functions, refer to the main menu
No. 7-1 PS1/PS2.
● Canceling Self-Diagnostic Function
1. Before canceling self-diagnostic function, execute
setting for FACTORY PRESET of main menu No. B
(Memory initialization inhibited or Memory initialized).
* In order to keep the user memory stored, be sure
to select PRESET INH (Memory initialization inhib-
ited).
2. Press the “ON/OFF” key of this unit to turn off the
power.
● Display provided when Self-Diagnos-
tic Function started
The FL display of this unit displays the protection function
history data then the main menu (sub-menu MAIN CPU
VERSION of main menu No. 1 ROM VER/SUM) a few
seconds later.
When there is no history of protection function:
● ダイアグの解除
1. ダイアグを解除する前に、メインメニュー No.Bの
FACTORYPRESET(メモリーの初期化禁止 / またはメ
モリーの初期化)の設定をします。
※ ユーザーメモリーを保持したい場合は、必ず
PRESETINH(メモリー初期化禁止)を選択してく
ださい。
2. 本機の “ON/OFF” キーを押して電源を切ります。
● ダイアグ起動時の表示
本機の FL ディスプレイにプロテクション履歴情報と
ファームウェアバージョン(英 1文字)が表示されます。
数秒後、メインメニュー No.1「ROMVER/SUM」のサブメ
ニュー「1-1MAINCPUVERSION」が表示されます。
プロテクション履歴がない場合:
プロテクション履歴がある場合:
アンプ部の異常によるプロテクション履歴がある場合
After a few seconds /
数秒後
A/D conversion value of voltage /
電圧の A/D 変換値
A/D conversion value of voltage /
電圧の A/D 変換値
電源部の電圧異常によるプロテクション履歴がある場合
When there is a history of protection function due to
abnormal voltage in the power supply section
プロテクションの詳細は、メインメニュー No.7-1 PS1/
PS2 を参照してください。
Main menu display /
メインメニュー表示
Opening message /
オープニング表示
H: High
L: Low
H: High
L: Low