3 - 62
CHK
ADJ
SETTING THE DIGITAL CLOCK
EAS00187
SETTING THE DIGITAL CLOCK
1. Set:
• digital clock
1
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Set the main switch to “ON”.
b. Push the “SELECT” button
2
and “RESET”
button
3
together for at least two seconds.
c. When the hour digits start flashing, push
the “RESET” button to set the hours.
d. Push the “SELECT” button and the minute
digits will start flashing.
e. Push the “RESET” button to set the min-
utes.
f. Push the “SELECT” button to start the
clock.
NOTE:
_
After reconnecting the battery, the clock indi-
cation is 1:00 and must be set to the correct
time.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
To Next Page
Loading...
