5 - 82
ENG
TRANSMISSION
EAS00421
CHECKING THE SHIFT FORKS
The following procedure applies to all of the
shift forks.
1. Check:
• shift fork cam follower
1
• shift fork pawl
2
Bends/damage/scoring/wear
→
Replace
the shift fork.
2. Check:
• shift fork movement
Rough movement
→
Replace the shift
forks.
EAS00422
CHECKING THE SHIFT DRUM ASSEMBLY
1. Check:
• shift drum grooves
Damage/scratches/wear
→
Replace the
shift drum assembly.
• shift drum segment
1
Damage/wear
→
Replace the shift drum
assembly.
• shift drum bearing
2
Damage/pitting
→
Replace the shift drum
assembly.
EAS00425
CHECKING THE TRANSMISSION
1. Measure:
• main axle runout
(with a centering device and dial gauge
1
)
Out of specification
→
Replace the main
axle.
Main axle runout limit
0.08 mm (0.0031 in)
To Next Page
Loading...
