3.2 Function Modules
Motion Control Function Modules (SVC32 and SVR32)
3-54
9. Double-click the motion parameter to set or monitor.
The Axis Display Selection Dialog Box (“Display in axis selected”) will be displayed.
10. Select the axis to set or monitor, and then click the OK Button.
The SVC Definition Tab Page for the selected motion parameters will be displayed.
The following examples show the SVC Definition Tab Page for each group of motion parameters.
• Fixed Parameters Tab Page
To change which motion parameters are displayed, double-click the required
motion parameters in the Work Space Pane.
To Next Page
Loading...
