YASKAWA JEPMC-CP3202-E

2.4 Rack Expansion Interface Unit
Appearance and Part Names
2-15
2
Appearances and Parts
2.4 Rack Expansion Interface Unit
A Rack Expansion Interface Unit is used to expand a Rack. There are two models of Rack Expansion
Interface Units, a Main Rack Expansion Interface Unit and an Expansion Rack Expansion Interface Unit.
This section shows the appearance and part names of the Rack Expansion Interface Units and describes
the indicators and connectors.
Appearance and Part Names
The following figure shows the appearance of the Rack Expansion Interface Unit and the part names.
Port 1 (Rack Expansion
Interface Unit connector)
Port 2 (Rack Expansion
Interface Unit connector)
Port 3 (Rack Expansion
Interface Unit connector)
Port 1 (Rack Expansion
Interface Unit connector)
Indicators
Indicators
Unit connector Unit connector
Main Rack Expansion
Interface Unit
Expansion Rack Expan-
sion Interface Unit
次回用