YASKAWA JEPMC-CP3202-E

2.2 CPU Unit
Display and Indicators
2-6
Display and Indicators
The CPU Unit has the following display and four indicators.
•Display
• Status indicators
• USB status indicator
• MECHATROLINK-III status indicators
• Ethernet status indicators
Display
The display shows the execution or error status of the CPU Unit.
Color Display Status Description
Red
Lit dot at lower right
Initializing
The CPU Unit started normally after the power was
turned ON or after the system was reset.
Flashing dot at lower right
Normal
operation
The CPU Unit is operating normally.
USB mem-
ory batch
transfer
Save or load is starting.
Save or load is in progress.
Save or load was completed.
After 2 seconds, the display will indicate the status of
the CPU Unit.
(Displayed by CPU-202 only.)
Failsafe
function
stopped the
CPU Unit.
Refer to the following manual for information on
internal temperature errors and Fan operation failure.
MP3000 Series MP3200 Troubleshooting Manual
(Manual No.: SIEP C880725 01)
Three digits after or
A system
error
occurred.
Refer to the following manual for details on errors.
MP3000 Series Basic Units Troubleshooting Manual
(Manual No.: SIEP C880725 01)
An alarm
occurred.