4 Start-Up Programming
118 YASK AWA TOEPYAIL1E01A YASKAWA AC Drive L1000E Quick Start Guide
3. Use a pair of diagonal cutters to cut an opening in the connector cover that allows the cable to pass through. The
cable should pass through the connector cover with the cover fastened to the drive.
Figure 61
Figure 68 Reattaching the Connector Cover (1)
4. Slide the connector cover back into place as shown in Figure 69.
NOTICE: Make sure the cable does not get pinched between the drive and the connector cover, as this could damage the cable.
Figure 62
Figure 69 Reattaching the Connector Cover (2)
Figure 63
Figure 70 Drive and Battery Connection Complete
Cut an opening to allow the
battery cable to pass through.
Connect
to battery.
To Next Page
Loading...
