YASKAWA L1000E - Page 207

B Parameter Table
YASK AWA TOEPYAIL1E01A YASKAWA AC Drive L1000E Quick Start Guide 207
Parameter Table
B
T2: PM Motor Auto-Tuning
No.
(Addr.)
Name Description Setting
T2-01
(750H)
Motor Auto-Tuning Mode
Selection
0: Motor Data input
1: Stationary Auto-Tuning
2: Stationary stator resistance Auto-Tuning
3: Initial magnet pole search parameters Auto-Tuning
4: Encoder offset stationary Auto-Tuning
10: Encoder offset rotational Auto-Tuning
11: Rotational back EMF constant Auto-Tuning
12: Auto-Tuning of PG-E3 encoder characteristics
<6>
Default: 0
Min: 0
Max: 12
T2-04
(730H)
Motor Rated Power
Sets the motor rated power as indicated on the motor nameplate.
Default:
<1>
Min: 0.00 kW
Max: 650.00 kW
T2-05
(732H)
Motor Rated Voltage
Enter the motor rated voltage as indicated on the motor nameplate.
Default: 200.0 V
<2>
Min: 0.0 V
Max: 255.0 V
<2>
T2-06
(733H)
Motor Rated Current
Enter the motor rated current as indicated on the motor nameplate.
Default:
<1>
Min: 10% of drive
rated current
Max: 200% of drive
rated current
<3>
T2-08
(734H)
Number of Motor Poles
Enter the number of motor poles for the motor as indicated on the motor
nameplate.
Default: 6
Min: 2
Max: 120
<5>
T2-09
(731H)
Motor Base Speed
Enter the base speed for the motor as indicated on the motor nameplate.
Default: 150 r/min
Min: 0 r/min
Max: 24000 r/min
T2-10
(754H)
Single Phase Stator
Resistance
Enter the 1-phase resistance of the stator winding.
Default: –
Min: 0.000 Ω
Max: 65.000 Ω
T2-11
(735H)
Motor d-Axis Inductance
Enter the d-axis inductance for the motor as indicated on the motor nameplate.
Default: –
Min: 0.00 mH
Max: 600.00 mH
T2-12
(736H)
Motor q-Axis Inductance
Enter the q-axis inductance for the motor as indicated on the motor nameplate.
Default: –
Min: 0.00 mH
Max: 600.00 mH
T2-13
(755H)
Induced Voltage Constant
Unit Selection
0: mV/(r/min). E5-09 will automatically be set to 0.0, and E5-24 will be used.
1: mV/(rad/sec). E5-24 will automatically be set to 0.0, and E5-09 will be used.
Default: 1
Min: 0
Max: 1
T2-14
(737H)
Motor Induced Voltage
Constant
Enter the induced voltage coefficient for the motor as indicated on the motor
nameplate.
Default: –
Min: 0.0
Max: 6500.0
<4>
T2-16
(738H)
Encoder Resolution
Sets the number of pulses per revolution for the PG being used (pulse generator
or encoder).
Default: 1024 ppr
Min: 1 ppr
Max: 15000 ppr
T2-17
(757H)
Encoder Offset
Sets the offset between encoder offset and the rotor magnetic axis.
Default: 0.0 deg
Min: -180.0 deg
Max: 180.0 deg
T2-18
(BB0H)
Speed Reference for Auto-
Tuning of PG-E3 Encoder
Characteristics
Sets the speed reference for execution of Auto-Tuning of PG-E3 encoder
characteristics
(T2-01 = 12).
Default: 10 r/min
Min: 1 r/min
Max: 30 r/min
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV
common
_
CLV
CLV/PM
V/f OLV