Installation
4 - 20
4.2 Ambient conditions and installation location
When installing a robot, it is necessary to satisfy the undermentioned environmental
conditions:
• Ambient temperature: From 0°C to +45°C.
• Air humidity: 20% to 80% relative humidity (non-condensing).
• Free of corrosive gases, liquids, or explosive gases. No water, oil or dust and free from
excessive electrical noise (plasma).
• Free from excessive vibration (Vibration acceleration: 4.9 m/s² [0.5 G] or less).
• Maximum unevenness of the support surface of the robot base: 0.5 mm.
To Next Page
Loading...
