9 Cable Wiring
9.1 Disassembly and Reassembly of Internal Wiring Harness
9-13
HW1485471
HW1485471
2. Connect the air line to the union from the back of the cover.
3. Mount the cover on the side face of the casing by using the cross
head APS bolts , and tighten them with the tightening torque shown
in table 9-1 “Internal Wiring Harness Parts Checklist (Connectors for
Internal User I/O Wiring Harness)” .
1
To Next Page
Loading...
