YASKAWA MOTOMAN-PH130F - Page 58

6 Disassembly and Reassembly of the Motors
6.3 Disassembly and Reassembly of U-Axis Motor
6-15
HW1485471
HW1485471
Fig. 6-4(b): Surface to Apply Sealing Bond on the U-axis Motor
Fig. 6-4(c): Motor Power Cable
Surface to apply
sealing bond 2
Apply sealing bond
evenly to whole surface.
Surface to apply
sealing bond 1
Apply sealing bond
evenly to whole surface.
Main key
Coupling nut
Alignment mark
58/134