YASKAWA MP3300iec

21 Option Module - LIO-04/05 Modules
52 YASKAWA America, Inc. MP3300iec Hardware Manual YAI-SIA-IEC-7
 Switch Settings
The LIO-04/05 Module status display the LED indicators (LD1 to LD8) change based on the SW1 rotary switch setting.
The following table shows the ON/OFF indicator display for digital input and digital output.
 Module Specifications
The following table shows the hardware specifications of the LIO-04/05 Module.
Indicator Color SW1 Status when Lit
LD1 to LD8 Green
0
Board Status Indicators
LD1 Normal operation: Lit, Error: Not lit
LD2 DI_00 to DI_07 status. Lit when any digital input is turned ON.
LD3 DO_00 to DO_07 status. Lit when any digital output is turned ON.
LD4 Pulse A/B input. Lit when phase A/B is turned ON.
LD5 Normal operation: Lit, Error: Not lit
LD6 DI_08 to DI_15 status. Lit when any digital input is turned ON.
LD7 DO_08 to DO_15 status. Lit when any digital output is turned ON.
LD8 Pulse Z input. Lit when phase Z is turned ON.
1 Digital input indicators: When DI_00 to DI_07 turn ON, corresponding indicators LD1 to LD8 are lit.
2 Digital input indicators: When DI_08 to DI_15 turn ON, corresponding indicators LD1 to LD8 are lit.
3 Digital output indicators: When DO_00 to DO_07 turn ON, corresponding indicators LD1 to LD8 are lit.
4 Digital output indicators: When DO_08 to DO_15 turn ON, corresponding indicators LD1 to LD8 are lit.
5
PI Input Indicators
LD1
LD2
LD3
LD4
Pulse A input
Pulse B input
Pulse Z input
-
LD5
LD6
LD7
LD8
Coincidence detection
Phase-Z latch
Digital input latch
-
Item Specifications
Name LIO-04/LIO-05
Model JAPMC-IO2303/JAPMC-IO2304
Digital Inputs
32 inputs
24VDC, 4.1 mA, combined sink mode/source mode inputs
(DI_00, 01, 16, and 17 also used for interrupts.)
Simultaneously ON Inputs
16 points (8 inputs/common): At ambient temperature of 55°C and 24VDC
10 points (5 inputs/common): At ambient temperature of 55°C and 28.8VDC
Refer to the following characteristics graph for details.
Digital Outputs
32 outputs
24VDC transistor open-collector outputs, sink mode outputs
Indicators
RUN (green)
ERR (red)
Dimensions (mm) 125 x 95 (H x D)
Mass 80 g
LD3
LD2
LD1
LD4
LD7
LD6
LD5
LD8
SW1
0
5
1
2
3
4
6
7
8
9
Indicators