www.dadehpardazan.ir 88594014-15
Network Maintenance
6.1.2
Using the Network Configuration Information Read Function
6-4
6
Precautions on Reading Network Configuration Information
• Use the network configuration information read function when no I/O communications
are being performed.
This function can be used during I/O communications but communications may be
affected.
• Use this function for Slaves for which no I/O allocations have been made.
• Up to 4 seconds may be required for each Slave when network configuration informa-
tion is read. It is recommended that the address range setting is limited to the required
addresses only.
To Next Page
Loading...
