To Next PageTo Next Page
Need help?Do you have a question about the YASKAWA pg-b3 and is the answer not in the manual?
Lists related manuals for the option and drive.
Defines technical terms and abbreviations used in the manual.
Explains safety message conventions (DANGER, WARNING, CAUTION, NOTICE).
Provides general safety precautions and warnings for installation and operation.
Describes the function and purpose of the PG-B3 Option.
Lists the Yaskawa drive models compatible with the PG-B3 Option.
Details the items included in the PG-B3 option package.
Lists the tools required for installing the option.
Identifies the main components of the PG-B3 option.
Shows the layout and labels of terminal blocks TB1 and TB2.
Highlights critical safety precautions for the installation procedure.
Details installation steps for 1000-series drives.
Details installation steps for GA700, CR700, and CH700 drives.
Illustrates the wiring connections for the PG-B3 option.
Specifies wire gauge, torque, and crimp terminal requirements.
Recommends specific cables for connecting the PG encoder.
Explains the function of each terminal on the option.
Lists drive parameters for setting up the PG-B3 option.
Lists fault codes related to the option and their causes/solutions.
Details error codes, causes, and solutions for the PG option.
Lists operation errors, their causes, and possible solutions.
Provides steps to prevent noise interference with PG signals.
Explains the complementary output interface circuit.
Explains the open-collector output interface circuit.
Explains the meaning and requirement of the CE mark.
States compliance with European EMC guidelines and harmonized standards.
Lists installation conditions for EMC compliance.
Details the technical specifications of the PG-B3 option.
General| Brand | YASKAWA |
|---|---|
| Model | pg-b3 |
| Category | Controller |
| Language | English |
