Installation and Wiring
8.3.2 Wiring Instructions
• Prevention of Radio Frequency Interference (RFI)
Since the SERVOPACKS are designed for industrial use, no measures are provided against
radio frequency interference. Use a noise filter in the power input line when using the SER-
VOPACKS near residential areas or where they are prone to radio frequency interference.
• Do not bend or apply tension to cables.
Since the conductor of a signal cable is very thin [0.1 to 0.3 mm2 (0.0002 to 0.0005 in2)],
handle it with adequate care.
8
8 -10
To Next Page
Loading...
Need help?
General
