YASKAWA Z1000 User's Manual Supplement

Contents
This document details changes made in Z1000 software PRG:1013 and includes new parameters,
settings, and displays.
The technical specifications of Z1000 models CIMR-ZU4A0361A and CIMR-4A0414A are revised.
Please use this information along with the Z1000 User Manual (TOEP C710606 45) packaged with
the product.
The user should have a thorough understanding of all safety precautions and operating instructions
prior to using Z1000 drive.
1 REPLACE FIGURE 1.6 ON PAGE 32......................................................................4
2 INSERT FIGURE 1.7 ON PAGE 33..........................................................................5
3 REPLACE PANEL CUT-OUT DIMENSIONS ON PAGES 42 AND 43....................6
4 REPLACE PAGES 51 AND 52................................................................................8
5 REPLACE FIGURE 3.10 PAGE 63........................................................................10
6 REPLACE TABLE 3.3 PAGES 79 AND 80...........................................................11
7 REPLACE SECTION 4.3 BEGINNING ON PAGE 106..........................................13
8 REPLACE TABLE 6.2 ON PAGE 239...................................................................16
9 REPLACE TABLE A.6 ON PAGE 249...................................................................18
10 ADD FIGURE A.5 ON PAGE 255..........................................................................19
11 REPLACE TABLE D.1 ON PAGE 328...................................................................20
12 REPLACE TABLE D.2 ON PAGE 333...................................................................22
13 REPLACE TABLE D.5 ON PAGE 336...................................................................23
14 REPLACE TABLE D.7 ON PAGE 338...................................................................24
15 REVISION HISTORY..............................................................................................25
Applicable Models: This document applies to all Z1000 drives with software version PRG:1013 or higher. The software
version is listed on the nameplate located on the side of the drive, and can also be viewed by displaying monitor
parameter U1-25.
YASKAWA TOEP YAISUP 04A YASKAWA AC Drive – Z1000 User Manual Supplement
3

YASKAWA Z1000 Specifications

General

Model	Z1000
Category	Controller
Humidity	95% RH or less (non-condensing)
Control Method	V/F Control
Frequency Range	400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 60°C
Altitude	Up to 1000 meters without derating
Cooling Method	Forced Air
Enclosure Rating	IP20
Voltage Class	200V, 400V