Yealink CP860 - Advanced Phone Features; Recording Using a USB Flash Drive; Intercom; Multicast Paging

Getting Started
3
To connect the PoE:
1. Connect the Ethernet cable between the Internet port on the phone and an available port
on the in-line power switch/hub.
Note
Connecting the Optional Expansion Microphone CPE80
You can connect optional expansion microphone to enhance the room coverage of the
conference phone.
If in-line power switch/hub is provided, you don’t need to connect the phone to the power
adapter. Make sure the switch/hub is PoE-compliant.
Important! Do not unplug or remove power to the phone while it is updating firmware and
configurations.