YealinkCP860 Phones Configuring Guide
28
It enables or disables the phone to perform a remote phone book search for an incoming
or outgoing call and display the matched call on the LCD screen.
3. Enter the value in the Search Flash Time (Seconds) field.
It configures how often to refresh the local cache of the remote phone book. The value
should be integer from 3600 to 1296000.
4. Mark the desired radio box of the Refresh When Accessing Remote Phonebook field.
It enables or disables the phone to refresh the local cache of the remote phone book every
time the phone accesses the remote phone book.
5. Click Save changes to accept the change.
6. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to Downloading Configuration Files
on page 11.
Search Source List in Dialing
You can search for a contact from the desired lists when the phone is in the dialing screen. The
lists can be Local Directory, History, Remote Phone Book and LDAP.
You can specify the priority of these lists in the search results. 1 is the highest priority, 6 is the
lowest priority. If the priority is set to Disabled, the IP phone cannot search the list when
searching for contacts.
To Next Page
Loading...
