Yealink CP860 - Blacklist

Using Your Phone
49
To pick up a call directly:
1. When the target number (e.g., 9702981675) receives an incoming call, you can dial the
directed pickup code followed by the target number (e.g., *129702981675) to pick up the
call or press the directed pickup key (if configured) to pick up the call directly.
Group Pickup
To configure a group pickup key via the CommPortal phone configurator:
1. Click on Programmable Keys - Soft Key->Key 1.
2. Select Group Pickup from the Soft key action field.
3. Enter the group pickup code in the Access Code field.
4. Enter the string that will appear on the LCD screen in the Label field.
5. Click Save changes to accept the change.
6. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to Downloading Configuration
Files on page 11.
To pick up a call in the group:
When the phone number (e.g., 9702981675) in the predefined group receives an incoming call,
you can dial the group pickup code (e.g., *11) or press the group pickup key (if configured) to
pick up the call directly. The call will be answered on your phone.
Advanced Phone Features
This chapter provides operating instructions for the advanced features of the CP860 IP
conference phone. Topics include:
 Intercom
 Multicast Paging
 DTMF
 Call Jump