YealinkCP860 Phones Configuring Guide
48
3. Click Save changes to accept the change.
4. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to Downloading Configuration
Files on page 11.
Call Pickup
You can use call pickup to answer someone else’s incoming call on your phone. The CP860 IP
conference phone supports directed call pickup and group call pickup. Directed call pickup is
used for picking up a call that is ringing at a target phone number. Group call pickup is used for
picking up a call that is ringing at any phone number in a certain group. The pickup group
should be predefined, contact your system administrator for more information.
Note
Directed Pickup
To configure a directed pickup key via the CommPortal phone configurator:
1. Click on Programmable Keys - Soft Key->Key 1.
2. Select Directed Pickup from the Soft key action field.
3. Enter the directed pickup code in the Access Code field.
4. Enter the target phone number in the Extension field.
5. Enter the string that will appear on the LCD screen in the Label field.
6. Click Save changes to accept the change.
7. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to Downloading Configuration
Files on page 11.
When the target phone number receives an incoming call, you can press the directed pickup key
to answer the call on your phone.
If there are many incoming calls at the same time, pressing the group pickup key on the phone
will pick up the call that rings first.
To Next Page
Loading...
