Customizing Your Phone
25
Directory
Directory provides easy access to frequently used lists. The lists may contain Local Directory,
History, Remote Phone Book and LDAP.
You can configure the display priority of these lists in the Directory. 1 is the highest priority, 6 is
the lowest priority. If the priority is set to Disabled, the list will not be displayed in the Directory.
Once the configuration is completed, you can press the Directory soft key on the phone to
access these lists.
To configure the display priority of the list via CommPortal phone configurator:
1. Click on Features->Directory.
2. Select the desired priority from the pull-down list of Local Directory Priority.
The default value is 1.
3. Select the desired priority from the pull-down list of History Priority.
The default value is Disabled.
4. Select the desired priority from the pull-down list of Remote Phone Book Priority.
The default value is Disabled.
5. Select the desired priority from the pull-down list of LDAP Priority.
The default value is Disabled.
6. Click Save changes to accept the change.
7. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to Downloading Configuration Files
on page 11.
To Next Page
Loading...
