YealinkCP860 Phones Configuring Guide
36
Keypad Lock
You can lock your phone temporarily when you are not using it. This feature helps to protect
your phone from unauthorized use.
Keypad lock consists of the following:
Menu Key: The Menu soft key is locked. You cannot access the menu of the
phone until unlocked.
Function Keys: The function keys are locked. You cannot use the mute key, redial
key, OK key, up and down navigation keys and soft keys until
unlocked.
All Keys: All keys are locked, except the volume key, on-hook key, off-hook
key, * key, # key and digit keys. You are only allowed to dial
emergency numbers, reject by pressing the Reject soft key or
on-hook key, answer incoming calls by press the Answer soft key or
off-hook key, and end a call by pressing the EndCall soft key or
on-hook key.
To configure the keypad lock via CommPortal phone configurator:
1. Click on Preferences->KeyPad Lock.
2. Mark the Enabled radio box of the KeyPad Lock Enabled field.
3. Select the desired type from the KeyPad Lock Type field.
4. Enter the unlock PIN in the Phone Unlock PIN field.
5. Enter the desired interval of automatic keypad lock in the Phone Lock Time Out field.
The default timeout is 0. It means the phone will not be automatically locked. You need to
long press to lock it immediately when the phone is idle.
If set to other values except 0 (e.g., 5), the phone will be locked when the phone is inactive
in idle screen for the designated time (in seconds).
6. Enter the emergency number in the Emergency Phone Number field.
7. Click Save changes to accept the change.
To Next Page
Loading...
