Yealink CP860 - Time & Date

YealinkCP860 Phones Configuring Guide
32
Forward
You can use this key feature to forward an incoming call to someone else.
Dependencies: Soft key action (Forward)
Label (key label displayed on the LCD screen)
Usage: Press the programmable key to enter the forward configuration screen.
Note
Intercom/PTT
You can use this key feature to quickly connect with the operator or the secretary. For more
information on how to configure intercom, refer to Intercom on page 50.
Dependencies: Soft key action (Intercom/PTT)
Line (the account this feature will be applied to)
Number ( the target extension number )
Label (key label displayed on the LCD screen)
Usage:
1. Press the programmable key to automatically connect with a preconfigured target
extension for outgoing intercom calls.
KeyPad Lock
You can use this key feature to lock your phone temporarily when you are not using it. To use
this key, you need to enable the keypad lock feature in advance. For more information on how
to configure the keypad lock, refer to Keypad Lock on page 30.
Dependencies: Soft key action (KeyPad Lock)
Label (key label displayed on the LCD screen)
Usage: Press the programmable key to lock the phone immediately when the phone is idle.
Last Caller ID Erasure
You can use this key feature to delete the record of the last received call. This is provided for
privacy reasons. This will also clear all call lists from the CommPortal feature. This feature will
not clear any call lists from the phone.
Dependencies: Soft key action (Last Caller ID Erasure)
Line (the account this feature will be applied to)
Access code (the last caller ID erasure access code)
Label (key label displayed on the LCD screen)
Usage: Press the programmable key to delete the record of the last received call.
The programmable key performs the same as the Forward soft key when receiving an incoming
call.