Yealink CP860 - Page 53

Using Your Phone
45
 Semi-Attended Transfer: Transfer a call when the target phone is ringing.
 Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1. Press the Tran soft key during a call.
2. Enter the number you want to transfer the call to.
3. Press the Tran soft key to complete the transfer.
Then the call is connected to the number to which you are transferring.
To perform a semi-attended transfer:
1. Press the Tran soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
- Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory should be configured in advance. Refer to
Directory on page 25 for more information).
- Press the Directory soft key, and then select History. Select the desired list and press
or to select the entry (Directory should be configured in advance. Refer to
Directory on page 25 for more information).
- Press the Directory soft key, and then select Remote Phone Book. Select the desired
group and search for the contact (Directory and Remote Phone Book should be
configured in advance. Refer to Directory on page 25 and Remote Phone Book on
page 26 for more information).
3. Press , or to dial out.
4. Press the Tran soft key to complete the transfer when receiving ringback.
To perform an attended transfer:
1. Press the Tran soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
- Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory and Remote Phone Book should be
configured in advance. Refer to Directory on page 25 for more information).
- Press the Directory soft key, and then select History. Select the desired list and press