Yealink CTP18-STD Administrator's Guide

| Configuring Camera Settings | 184
2. Configure and save the following settings:
Parameter Description Configuration Method
Intelligent Tracking/Tracking
Mode
Specify the camera control
mode.
• Manual Control
• Auto Framing: if you enable
this mode, the camera will
be adjusted automatically
and you cannot control the
camera.
• Speaker Tracking(only
applicable to MeetingEye
600/MeetingEye 400/
PVT960/PVT940): if you
enable this mode, the camera
will be adjusted automatically
and you cannot control the
camera.
Default: Manual Control
Web user interface
Endpoint
CTP20/CTP18
Framing Speed
(it only is applicable to
MeetingEye 600/MeetingEye
400/PVT960/PVT940)
Select the desired framing speed
for Auto Framing or Speaker
Tracking.
• Quick
• Normal
• Slow
Default: Quick.
Web user interface
Video Switching Mode
(it is only applicable to
MeetingEye 400/ PVT940)
After you enable the auto
framing or the speaker tracking
feature, you can select the
desired video switching method
for the camera.
• Direct Switching
• Smooth Switching
Default: Direct Switching.
Web user interface
Portrait Mode
(it is only applicable to
MeetingEye 600/ PVT960)
Select the desired portrait mode
for Auto Framing or Speaker
Tracking.
• Small
• Middle
• Large
Default: Middle.
Web user interface

Yealink CTP18-STD Specifications

General

Brand	Yealink
Model	CTP18-STD
Category	Touch Panel
Language	English