Yealink CTP18-STD Administrator's Guide

| Configuring Camera Settings | 190
Parameter Description Configuration Method
Wide Dynamic
Range
Off or Specify the WDR. The value
represents the compression degree of the
dynamic range
Cameras with WDR technology can work
perfectly both in the bright and the dark
conditions and present clear images that
balances different lighting, so that you can
identify the details.
• Off-do not use WDR.
• 1~5
Note: For MeetingEye 600/PVT960/
VC880/VC800/VC500/VC200/VC200-E/
PVT980/PVT950, the default value is 2; for
MeetingEye 400/PVT940, the default value
is off.
Web user interface
Endpoint
CTP20/CTP18
Configuring the Mode of Shutter Priority
Shutter priority allows you to choose a specific shutter speed while the camera adjusts the aperture to
ensure adequate exposure.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Camera > Exposure.
• On your VCS: go to More > Settings > Basic > Camera > Exposure.
•
On your CTP20/CTP18, tap > Settings > Basic > Camera > Exposure.
2. Select Shutter Priority from the Exposure Mode drop-down menu.
3. Configure and save the following settings:
Parameter Description Configuration Method
Shutter
Configure the value of the shutter.
Valid Value: 1/60, 1/90, 1/100, 1/125, 1/180,
1/250, 1/350, 1/500, 1/725, 1/1000, 1/1500,
1/2000, 1/3000, 1/4000, 1/6000, 1/10000
Default: 1/100.
Web user interface
Endpoint
CTP20/CTP18
Exposure
Compensation
Configure the value of exposure
compensation.
The exposure compensation is used
to compensate the camera effectively
when the camera is shooting in a backlit
environment. If the environment light is dark,
you can increase the compensation value.
Note: the valid value is -6 to 6. The default
value is 0.
Web user interface
Endpoint
CTP20/CTP18

Yealink CTP18-STD Specifications

General

Brand	Yealink
Model	CTP18-STD
Category	Touch Panel
Language	English