Yealink SIP-T21 E2

Setting Up Your System
123
static.network.802_1x.anonymous_identity
static.network.802_1x.identity
static.network.802_1x.md5_password
static.network.802_1x.root_cert_url
static.network.802_1x.client_cert_url
Web User Interface
Configure the 802.1X authentication.
Navigate to:
http://<phoneIPAddress>/servlet?p=netwo
rk-adv&q=load
Phone User Interface
Configure the 802.1X authentication.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
static.network.802_1x.mode
0, 1, 2, 3, 4, 5, 6 or 7
0
Description:
Configures the 802.1x authentication method.
0-EAP-None
1-EAP-MD5
2-EAP-TLS
3-EAP-PEAP/MSCHAPv2
4-EAP-TTLS/EAP-MSCHAPv2
5-EAP-PEAP/GTC
6-EAP-TTLS/EAP-GTC
7-EAP-FAST
If it is set to 0 (EAP-None), 802.1x authentication is not required.
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->802.1x->802.1x Mode
Phone User Interface:
Menu->Advanced (default password: admin) ->Network->802.1x->802.1x Mode
static.network.802_1x.eap_fast_provision_mode
0 or 1
0
Description: