Yealink SIP-T21 E2

Configuring Basic Features
151
Details of Configuration Parameters:
Parameters
Permitted Values
Default
static.auto_provision.power_on
0 or 1
1
Description:
Triggers the power on feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process when powered
on.
Web User Interface:
Settings->Auto Provision->Power On
Phone User Interface:
None
static.auto_provision.repeat.enable
0 or 1
0
Description:
Triggers the repeatedly feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process repeatedly.
Web User Interface:
Settings->Auto Provision->Repeatedly
Phone User Interface:
None
static.auto_provision.repeat.minutes
Integer from 1 to
43200
1440
Description:
Configures the interval (in minutes) for the IP phone to perform an auto provisioning
process repeatedly.
Note: It works only if the value of the parameter “static.auto_provision.repeat.enable” is set
to 1 (On).
Web User Interface:
Settings->Auto Provision->Interval(Minutes)
Phone User Interface: