Yealink SIP-T21 E2

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
152
Parameters
Permitted Values
Default
None
static.auto_provision.weekly.enable
0 or 1
0
Description:
Triggers the weekly feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process weekly.
Web User Interface:
Settings->Auto Provision->Weekly
Phone User Interface:
None
static.auto_provision.weekly_upgrade_interval
Integer from 0 to 12
0
Description:
Configures the time interval (in weeks) for the IP phone to perform an auto provisioning.
If it is set to 0, the IP phone will perform an auto provisioning process at the specific day(s)
configured by the parameter “static.auto_provision.weekly.dayofweek” every week.
If it is set to other values (e.g., 3), the IP phone will perform an auto provisioning process at
a random day between the specific day(s) configured by the parameter
“static.auto_provision.weekly.dayofweek”every three weeks.
Note: It works only if the value of the parameter “static.auto_provision.weekly.enable” is set
to 1 (On).
Web User Interface:
Settings->Auto Provision->Weekly Upgrade Interval(0~12week)
Phone User Interface:
None
static.auto_provision.inactivity_time_expire
Integer from 0 to 120
0
Description:
Configures the delay time (in minutes) to perform an auto provisioning process when the IP
phone is inactive at regular week.
If it is set to 0, the IP phone will perform an auto provisioning process at random between a
starting time configured by the parameter “static.auto_provision.weekly.begin_time” and an
ending time configured by the parameter “static.auto_provision.weekly.end_time”.
If it is set to other values (e.g., 60), the IP phone will perform an auto provisioning process