Yealink SIP-T21 E2

Configuring Basic Features
153
Parameters
Permitted Values
Default
only when the IP phone has been inactivated for 60 minutes (1 hour) between the starting
time and ending time.
Note: The IP phone may perform an auto provisioning process when you are using the IP
phone on office hour. It works only if the value of the parameter
“static.auto_provision.weekly.enable” is set to 1 (On).
Web User Interface:
Settings->Auto Provision->Inactivity Time Expire(0~120min)
Phone User Interface:
None
static.auto_provision.weekly.begin_time
Time from 00:00 to
23:59
00:00
Description:
Configures the starting time of the day for the IP phone to perform an auto provisioning
process weekly.
Note: It works only if the value of the parameter “static.auto_provision.weekly.enable” is set
to 1 (On).
Web User Interface:
Settings->Auto Provision->Time
Phone User Interface:
None
static.auto_provision.weekly.end_time
Time from 00:00 to
23:59
00:00
Description:
Configures the ending time of the day for the IP phone to perform an auto provisioning
process weekly.
Note: It works only if the value of the parameter “static.auto_provision.weekly.enable” is set
to 1 (On).
Web User Interface:
Settings->Auto Provision->Time
Phone User Interface:
None
static.auto_provision.weekly.dayofweek
0, 1, 2, 3, 4, 5, 6 or a
combination of these
digits
0123456