Yealink SIP-T21 E2 Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
318
d
account.X.dialplan.digitmap.apply_to.press_s
end
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
dialplan.digitmap.enable
0 or 1
0
Description:
Enables or disables the digit map feature for the IP phone.
0-Disabled
1-Enabled
Note: The value configured by the parameter “account.X.dialplan.digitmap.enable” takes
precedence over that configured by this parameter.
Web User Interface:
None
Phone User Interface:
None
dialplan.digitmap.string
String
within
2048
characters
[2-9]11 | 0T |
011xxx.T | [0-
1][2-9]xx
xxxxxxx | [2-
9]xx xxxxxxx |
[2-9]xxxT |
**x.T | +x.T|
00x.T
Description:
Configures digit map pattern used for the dial plan.
Example:
dialplan.digitmap.string = <[2-9]x:86>3.T|0x.!|1xxx
Note: The string must be compatible with the digit map feature of MGCP described in 2.1.5
of RFC 3435. It works only if the value of the parameter “dialplan.digitmap.enable” or
“account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by the
parameter “account.X.dialplan.digitmap.string” takes precedence over that configured by
this parameter.
Web User Interface:
None

Yealink SIP-T21 E2 Specifications

General

Brand	Yealink
Model	SIP-T21 E2
Category	IP Phone
Language	English