Yealink SIP-T21 E2 Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
322
Parameters
Permitted
Values
Default
Web User Interface:
None
Phone User Interface:
None
dialplan.digitmap.apply_to.directory_dial
0 or 1
1
Description:
Enables or disables the digit map to be applied to the numbers dialed from the directory.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “dialplan.digitmap.enable” or
“account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by the
parameter “account.X.dialplan.digitmap.apply_to.directory_dial” takes precedence over that
configured by this parameter.
Web User Interface:
None
Phone User Interface:
None
dialplan.digitmap.apply_to.forward
0 or 1
1
Description:
Enables or disables the digit map to be applied to the numbers that you want to forward to
when performing call forward.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the incoming calls will be forwarded to a desired destination
number according to the string of the digit map.
Note: It works only if the value of the parameter “dialplan.digitmap.enable” or
“account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by the
parameter “account.X.dialplan.digitmap.apply_to.forward” takes precedence over that
configured by this parameter.
Web User Interface:
None
Phone User Interface:
None

Yealink SIP-T21 E2 Specifications

General

Brand	Yealink
Model	SIP-T21 E2
Category	IP Phone
Language	English