Configuring Basic Features
361
<contact display_name="" office_number="" mobile_number="" other_number="" line=""
ring="" group_id_name="" default_photo=""/>
4. Specify the values within double quotes.
For example:
<group display_name="Friend" ring="Splash.wav"/>
<contact display_name="Lily" office_number="1020" mobile_number="1021"
other_number="1112" line="1,2" ring="Ring1.wav" group_id_name="Friend"
default_photo="Config:cutom1.jpg"/>
<contact display_name="Tom" office_number="2020" mobile_number="2021"
other_number="2112" line="2" ring="Ring1.wav" group_id_name="Friend"
default_photo="Config:cutom2.png"/>
5. Save the change and place this file to the provisioning server.
6. Specify the access URL of the custom local contact template file in the configuration files.
There are two methods to specify custom avatar and icon for contacts:
Method 1:
local_contact.photo.url = tftp://192.168.10.25/cutom1.jpg
local_contact.photo.url = tftp://192.168.10.25/cutom2.png
local_contact.data.url = tftp://192.168.10.25/contact.xml
local_contact.icon_image.url = tftp://192.168.10.25/cutom1.jpg
local_contact.icon_image.url = tftp://192.168.10.25/cutom2.png
During the auto provisioning process, the IP phone connects to the provisioning server
“192.168.10.25”, and downloads the avatars (cutom1.jpg and cutom2.png), icons
(cutom1.jpg and cutom2.png) and the contact file “contact.xml”.
Method 2:
local_contact.image.url = tftp://192.168.10.25/photo1.tar
local_contact.data.url = tftp://192.168.10.25/contact.xml
local_contact.icon.url = tftp://192.168.10.25/photo2.tar
To Next Page
Loading...
Need help?
General