Yealink SIP-T21 E2

Setting Up Your System
73
Parameters
Permitted Values
Default
Configures the priority for the wireless network X for the IP phone.
5 is the highest priority, 1 is the lowest priority.
Note: It works only if the value of the parameter “static.wifi.enable” is set to 1 (Enabled). It is
only applicable to SIP-T54S/T52S/T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G/CP920 IP
phones.
Web User Interface:
Network->Wi-Fi->Change Priority
Phone User Interface:
None
static.wifi.X.security_mode
(X ranges from 1 to 5)
NONE, WEP, WPA-PSK
or WPA2-PSK
NONE
Description:
Configures the security mode of the wireless network X.
Note: It works only if the value of the parameter “static.wifi.enable” is set to 1 (Enabled). It is
only applicable to SIP-T54S/T52S/T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G/CP920 IP
phones.
Web User Interface:
Network->Wi-Fi->Secure Mode
Phone User Interface:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Add->Security Mode
static.wifi.X.cipher_type
(X ranges from 1 to 5)
NONE, WEP, TKIP,
CCMP or TKIP CCMP
NONE
Description:
Configures the encryption type of the wireless network X.
NONE-NONE
WEP-WEP
TKIP-TKIP
CCMP-AES
TKIP CCMP-TKIP AES
Note: It works only if the value of the parameter “static.wifi.enable” is set to 1 (Enabled) and
“static.wifi.X.security_mode” is set to WPA-PSK or WPA2-PSK. It is only applicable to SIP-
T54S/T52S/T48G/T48S/T46G/T46S/T42S/T41S/T29G/T27G/CP920 IP phones.
Web User Interface:
Network->Wi-Fi->Cipher Type
Phone User Interface: