Configuring Basic Features
93
7. (Optional.) Enter the anonymous call off code in the Off Code field.
8. Click Confirm to accept the change.
To configure the anonymous call via phone user interface:
1. Press Menu->Features->Anonymous Call.
2. Press or , or the Switch soft key to select the desired line from the Line ID
field.
3. Press or , or the Switch soft key to select the desired value from the Local
Anon field.
4. Press or , or the Switch soft key to select the desired value from the Send
Anon field.
5. (Optional.) Enter the anonymous call on code in the Call On Code field.
6. (Optional.) Enter the anonymous call off code in the Call Off Code field.
7. Press the Save soft key to accept the change.
Anonymous call rejection allows IP phones to automatically reject incoming calls from
callers whose identity has been deliberately concealed. The anonymous caller’s phone
LCD screen presents “Anonymity Disallowed”. Anonymous call rejection is configurable
on a per-line basis.
The anonymous call rejection on code and anonymous call rejection off code
configured on IP phones are used to activate/deactivate the server-side anonymous call
rejection feature. They may vary on different servers.
To Next Page
Loading...
Need help?
General