Yealink SIP-T2XP

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
92
User-Agent: Yealink SIP-T28P 2.72.0.1
Privacy: id
Supported: replaces
Allow-Events: talk,hold,conference,refer,check-sync
P-Preferred-Identity: <sip:1012@10.2.1.199>
Content-Length: 302
The anonymous call on code and anonymous call off code configured on IP phones are
used to activate/deactivate the server-side anonymous call feature. They may vary on
different servers. Send Anonymous Code feature allows IP phones to send anonymous
on/off code to the server.
Procedure
Anonymous call can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure anonymous call.
For more information, refer to
Anonymous Call on page 313.
Local
Web User Interface
Configure anonymous call.
Navigate to:
http://<phoneIPAddress>/servlet
?p=account-basic&q=load&acc
=0
Phone User Interface
Configure anonymous call.
To configure anonymous call via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Basic.
4. Select the desired value from the pull-down list of Local Anonymous.
5. Select the desired value from the pull-down list of Send Anonymous Code.
6. (Optional.) Enter the anonymous call on code in the On Code field.